24 August 1998: Add revised message
20 August 1998
Date: Fri, 14 Aug 1998 17:18:31 +0200 To: jya@pipeline.com From: interception <interception@ii-mel.com> Subject: swiss automatic 100% listed: called phone identification Source: Lora Radio - Mr. Ptesch (had verified) Luxembourg NEW: Each CALL RECEIVED ON EACH SWISSLINE IS IDENTIFIED BY SWISSCOM! Actually, each 100% swiss line (analogic also) is on CALL IDENTIFICATION LINE mode. In others countries, RESTRICTION CALL LINE mode is actived. Unpracticed in Switzerland. In clear totally illegal. Alone in the world with such practices, A tap-roboter 8000 Gb manages these billion of numbers at Villars/Glâne (FR): PREMISES PHONE NUMBER OFFICE NUMBER Terco, rue Chandolan, 6, Villars sur Glâne SWISSCOM computer center (tape roboter) MORE DETAILS: http://www.ii-mel.com/interception/centrauxgb.html http://www.ii-mel.com/interception/automatiquesgb.html EXACT TERMINOLOGIE UIT-T CLIP - Calling Line Identification Presentation CLIR - Calling Line Identification Restriction COLP - Connected Line Identification Presentation COLR - Connected Line Identification Restriction
Date: Wed, 19 Aug 1998 15:33:28 +0200 To: jy@jya.com From: interception <interception@ii-mel.com> Subject: CAllED LINE ID. SUBJECT CALLED SWISS LINE IDENTIFICATION: 100% add: In France, the numbers of the french red list (official 100% confidentialy) are identified via CLIP on public standard (hospital, association,...).
Date: Sat, 24 Aug 1996 19:04:51 +0200 To: John Young <jy@jya.com> From: interception <interception@ii-mel.com> ADD CORRECTED TODAY BY CHRISTIAN MASSON: The basic location information can be fetched from the VLR - this determines the Location Area where the MS is located. Depending on the particular network configuration it can be a very large area. More accurate informations are obtained from the measurement reports. The MS/OMC measures and reports the BSC the fieldstrength of its serving cell (BSIC) and the 6 strongest neighbuouring cells. From these the MS can be pretty well located with a planning or a measurement tool. It can not be avoided with not making or receiving calls - the measurements done during PLU provide adequate data. Besides, the operator trace on individual IMSIs and record every event. It's done automatically . Regards, Zoli